Non-Shrinkable Halogen Free Flame-Retardant Tube PE

	Product introduction: Thin proctuct is made from Cross-Linked Halogen Free Flame-retardant Polyolefin marial. It supplies mechanical and insulation protection for bundles wires. Its raw material is based on Halogen Free Environment friendly series.It dont't include unwholesome Eight Bad Eight Bad Elements,PBB,PBDE and other substances,this product is the best product to replace PVC material. 1.Operating Temperature:-55℃～ 125℃; 2.RoHS compliant.
	Available Color:	Black(Other color available upon request.)

Technical Data:
Performance	Test Method	Stantard
Tensile Strength(MPa)	ASTM D2671	≥10.4
Elongation(%)	ASTM D2671	≥200
Volume Resistance	ASTM D876	≥1014
Flammability	UL 224	Self extinct
Copper corrosion	UL 224	PASS
Water Absorption	ASTM D570	≤0.5
Dielectric strength(kv/mm)	GB/1408	≥15

Specification:
Size(AWG)	I.D.(mm)	W.T.(mm)	Stantard(m/spool)
AWG18	1.00±0.10	0.40±0.06	200
AWG16	1.30±0.10	0.40±0.06	200
AWG14	1.65±0.10	0.40±0.06	200
AWG12	2.10±0.15	0.40±0.06	200
AWG10	2.60±0.15	0.50±0.08	200
AWG8	3.30±0.15	0.50±0.08	200
AWG6	4.10±0.20	0.50±0.08	100
AWG4	5.20±0.20	0.50±0.08	100
AWG2	6.50±0.20	0.50±0.08	100
AWG0	8.30±0.30	0.50±0.08	100
3/8"	9.50±0.40	0.50±0.08	100
7/16"	11.10±0.40	0.50±0.08	100
1/2"	12.70±0.40	0.50±0.08	100

Page9　Home  Pre. Next  End  PDFdownload

　　Shenzhen Woer Heat-Shrinkable Material Co., Ltd. is the leading manufacturer of heat shrink material products in China. Products we offer are as below: Heat shrinkable tubing, Teflon, PTFE tubing, high heat and abrasion resistant wire, silicone tubing; power cable accessories (heat shrinkable, cold shrinkable and pre-molded for low, medium and high voltage), termination kits, bus bar, insulation sleeves for telecommunication cables and pipeline; fine chemical.