Non Flame-retardant Heat Shrinkable Tube RSFR- 105

	Product Introduction: Non Flame-retardant Heat Shrinkable Tubes are made from good quality high polymer through electronic accelerator radiation and continuous expansion after developd in shape.Products hold advantages of soft,transparent,brtghtly-colored,fast connecting, performance stability and so on.Widely appllicated for connecting wires where flame-retardant properties are not needed,for example Wiring-end, joints protection;Agricultural machinery and household handrails the surface protection of mechanical handrails,protective cradies,decoration and lighting,and so on.
	Characteristics:  1.Tem perature rang:-55℃～125℃; 2.Minimum shrink temperture:70℃;complete shrink     temperture:105℃; 3.Soft,insulated,fast contraction,brightly-colored; 4.User- friendly,using oven and hot air guns to heat   could shrink; 5.Shrink ratio:2:1,Longitudinal shrinkage ratio:   ≤ ±5%; 6.RoHS compliant.
	Standard color：	Clear(Pther color available upon request.)

Technical Data:
Property	Test Method	Stantard
Tensile Strength(MPa)	GB/T1040	≥10.4
Elongation at Break(%)	GB/T1040	≥200
Dieletric Strength(kv/mm)	GB/T1408	≥15
Volume Resistance	GB/T1410	≥1× 1014

Specification:
Size(mm)	As Supplied(mm)		After Recovery(mm)		Standard Package			Application Range (mm)
	I.D.	Average W.T.	Max.I.D.	Average W.T.	M/spool	Spools/carton	Spcification
Φ 0.8	1.0±0.2	0.15±0.05	≤0.50	0.22±0.10	200	23	31×31×44.5	0.6～0.8
Φ 1.0	1.5±0.3	0.15±0.05	≤0.65	0.28±0.10	200	16	31×31×44.5	0.75～0.9
Φ 1.5	2.0±0.3	0.18±0.05	≤0.85	0.32±0.10	200	12	31×31×44.5	0.95～1.4
Φ 2.0	2.5±0.3	0.18±0.05	≤1.00	0.35±0.10	200	15	46×46×44.5	1.1～1.8
Φ 2.5	3.0±0.3	0.18±0.05	≤1.30	0.38±0.10	200	13	46×46×44.5	1.35～2.3
Φ 3.0	3.5±0.4	0.18±0.05	≤1.50	0.40±0.10	200	11	46×46×44.5	1.6～2.7
Φ 3.5	4.0±0.4	0.22±0.05	≤1.80	0.42±0.10	200	9	46×46×44.5	1.85～3.2
Φ 4.0	4.5±0.4	0.25±0.05	≤2.00	0.45±0.10	200	7	46×46×44.5	2.1～3.6
Φ 4.5	5.0±0.4	0.25±0.05	≤2.30	0.50±0.10	200	10	46×46×44.5	2.35～4.0
Φ 5.0	5.5±0.4	0.25±0.05	≤2.5	0.55±0.10	100	9	46×46×44.5	2.6～4.5
Φ 6.0	6.5±0.4	0.28±0.05	≤3.0	0.55±0.10	100	7	46×46×44.5	3.1～5.4
Φ 7.0	7.5±0.4	0.28±0.05	≤3.5	0.55±0.10	100	14	46×46×31	3.7～6.3
Φ 8.0	8.5±0.5	0.28±0.05	≤4.0	0.60±0.10	100	13	46×46×31	4.2～7.2
Φ 9.0	9.5±0.5	0.30±0.08	≤4.5	0.60±0.10	100	12	46×46×31	4.7～8.0
Φ 10	10.5±0.5	0.30±0.08	≤5.0	0.60±0.10	100	11	46×46×31	5.2～9.0
Φ 11	11.5±0.5	0.30±0.08	≤5.5	0.60±0.10	100	11	46×46×31	5.7～10
Φ 12	12.5±0.5	0.30±0.08	≤6.0	0.60±0.10	100	10	46×46×31	6.2～11
Φ 13	13.5±0.5	0.35±0.10	≤6.5	0.65±0.10	100	9	46×46×29.5	6.7～12
Φ 14	14.5±0.5	0.35±0.10	≤7.0	0.65±0.10	100	9	46×46×31	7.3～13
Φ 15	15.5±0.6	0.40±0.12	≤7.5	0.70±0.10	100	8	46×46×29.5	7.8～14
Φ 16	17.0±0.6	0.40±0.12	≤8.0	0.70±0.10	100	8	46×46×31	8.3～15
Φ 17	17.5±0.6	0.40±0.12	≤8.5	0.70±0.10	100	7	46×46×29.5	8.8～16
Φ 18	19.0±0.7	0.40±0.15	≤9.0	0.80±0.15	100	7	46×46×29.5	9.3～17
Φ 20	22.0±0.7	0.40±0.15	≤10.0	0.80±0.15	100	6	46×46×29.5	10.4～19
Φ 22	24.0±0.7	0.40±0.15	≤11.0	0.80±0.15	100	6	46×46×31	11.4～21
Φ 25	26.0±0.7	0.55±0.15	≤12.5	0.90±0.15	100	6	46×46×31	12.8～24
Φ 28	29.0±0.7	0.55±0.15	≤14.0	0.90±0.15	50	5	46×46×29.5	14.4～29
Φ 30	31.5±0.7	0.55±0.15	≤15.0	0.95±0.15	50	5	46×46×31	16～29
Φ 35	36.5±0.7	0.55±0.15	≤17.5	1.00±0.15	50	4	46×46×29.5	18～34
Φ 40	41.5±0.7	0.55±0.15	≤20.0	1.00±0.15	50	4	46×46×31	21～39
Φ 45	46.5±0.7	0.55±0.15	≤22.5	1.00±0.15	25	5	31×31×40.5	23～44
Φ 50	51.5±0.7	0.55±0.15	≤25.0	1.00±0.15	25	5	46×46×44.5	26～49

Page7　Home  Pre. Next  End  PDFdownload

　　Shenzhen Woer Heat-Shrinkable Material Co., Ltd. is the leading manufacturer of heat shrink material products in China. Products we offer are as below: Heat shrinkable tubing, Teflon, PTFE tubing, high heat and abrasion resistant wire, silicone tubing; power cable accessories (heat shrinkable, cold shrinkable and pre-molded for low, medium and high voltage), termination kits, bus bar, insulation sleeves for telecommunication cables and pipeline; fine chemical.