Environment Friendly Flame- retardant Heat Shrinkable Tube W-1-PT(normal wall) W-1-PTCB(thin wall)

	Standard:	UL224  VW-1 C-UL CSA C 22.2 OFT
	Product Introduction: WOER Environment Friendly Flame-retardant Heat Shrinkable Tube is newly developed environment-friendly flame retardant heat shrinkable tube,using specially designed formulation of high polymers,through cross-link by electronic accelerator and continuous expansion. The properties of environment-friendly,flexibility flame retadant,quick shrink and stable performance mark them widely used in the field of electronics,communication,automoblile,and widely applied for connecting or end-handing,electric wire,insulating and harness of electric wire,corrosion and rust-proof of metallic rods or tubes,antena protection and marking for other products.
	Characteristics: 1.Operating Temperature:-55℃～ 125℃; 2.Shrinking Temperature:Start at 70℃，and shrunk totally at 110℃(for thin wall-CB)，Or 125℃(for normal wall)，longitudinal shrink ratio:≤±5%; 3.flexible,flame retardant; 4.The Available sizes from Φ0.6～Φ180mm ，Can product upon customer's special requirement; 5.Easy for use,using oven or heating gun and it will shrink; 6.Meet RoHS standard.
	Standard colors:	Black,White,Red,Yellow,Green,Purple,Blue,Grey,Brown (Other color available upon request.)

Technical Data:
PROPERTY			Test Method	Standard
Physical	Tensile Strength(MPa)		GB/T1040	≥10.4
	Elongation(%)		GB/T1040	≥200
	Tensile Strength after Aging(MPa)		UL 224 158℃×168hr	≥7.3
	Elongation after Aging(%)		UL 224 158℃×168hr	≥100
	Heat Resistance		UL 224 250℃×4hr	No viscidity No cracking
Electrical	Cold Blend		UL 224 -30℃×4hr	No cracking
	Dielectric Strength(kv/mm)		GB/T1408	≥15
	Dielectric Withstand	150V	UL 224	No breakdown for 1500V
		600V	UL 224	No breakdown for 2500V
	volume resistance(Ω.cm)		GB/T1410	≥1×1014
Chemical	Anti Corrosion		UL 224 158℃×168hr	PASS
	Copper stability		UL 224 158℃×168hr	PASS
	Flammability		UL 224	VW-1

Environment Friendly Flame-retardant Normal Wall Heat Shrinkable Tube(inch)
Inch	Size(mm) (H)	As Supplied(mm)		After Recovery(mm)		Standard Package			Application Range (mm)
		I.D.	Average W.T.	Max.I.D.	Average W.T.	M/spool	spools/carton	Carton size(cm)
3/64	Φ0.8	1.0±0.2	0.15±0.05	≤0.50	0.22±0.10	200	23	31×31×44.5	0.6~0.8
1/16	Φ1.0	1.5±0.3	0.15±0.05	≤0.65	0.28±0.10	200	16	31×31×44.5	0.75~0.9
3/32	Φ2.0	2.5±0.3	0.18±0.05	≤1.00	0.35±0.10	200	15	46×46×44.5	1.1~1.8
1/8	Φ3.0	3.5±0.4	0.18±0.05	≤1.50	0.40±0.10	200	11	46×46×44.5	1.6~2.7
3/16	Φ4.5	5.0±0.4	0.25±0.05	≤2.30	0.50±0.10	100	10	46×46×44.5	2.35~4.0
1/4	Φ6.0	6.5±0.4	0.28±0.05	≤3.0	0.55±0.10	100	7	46×46×44.5	3.1~5.4
3/8	Φ9.0	9.5±0.5	0.30±0.08	≤4.5	0.60±0.10	100	12	46×46×31	4.7~8.0
1/2	Φ12	12.5±0.5	0.30±0.08	≤6.0	0.60±0.10	100	10	46×46×31	6.2~11
3/4	Φ18	19.0±0.7	0.40±0.15	≤9.0	0.80±0.15	100	7	46×46×29.5	9.3~17
1	Φ25	26.0±0.7	0.55±0.15	≤12.5	0.90±0.15	50	6	46×46×31	12.8~24
1-1/4	Φ28	29.0±0.7	0.55±0.15	≤14.0	0.90±0.15	50	5	46×46×29.5	14.4~29
1-1/2	Φ40	41.5±0.7	0.55±0.15	≤20.0	1.00±0.15	50	4	46×46×31	21~39
2	Φ50	51.0±0.7	0.55±0.15	≤25.0	1.00±0.15	25	5	46×46×44.5	26~49
3	Φ80	≥80	0.70±0.15	≤41.0	1.46±0.20	25	3	31×31×42	45~75
4	Φ100	≥100	0.70±0.20	≤51.0	1.46±0.20	25	2	31×31×34.5	55~95
5	Φ120	≥120	0.70±0.20	≤61.0	1.56±0.20	15	2	31×31×40.5	65~115

Page4　Home  Pre. Next  End  PDFdownload

　　Shenzhen Woer Heat-Shrinkable Material Co., Ltd. is the leading manufacturer of heat shrink material products in China. Products we offer are as below: Heat shrinkable tubing, Teflon, PTFE tubing, high heat and abrasion resistant wire, silicone tubing; power cable accessories (heat shrinkable, cold shrinkable and pre-molded for low, medium and high voltage), termination kits, bus bar, insulation sleeves for telecommunication cables and pipeline; fine chemical.