Medium Wall Heat Shrinkable Tube SBRSM(With adhesive),RSFRM(Without adhesive)

	Product Introduction: Medium Wall Heat Shrinkable Tube is manufactured by co-extrusion polyolefin and environment friendly hot-melt adhesive.Designed to provide both insulation and sealing for protected articles.Both adhesive-lined and without adhesive available.
	Charactoristics:  1.Electrical and communication cable joint and    termination; 2.Pipe anti-corrosion; 3.Protection and sealing for mechanical equipment; 4.Physical protection and moisture sealing of high   voltage air insulated connectors and lugs,such   as lug connections to bars; 5.Operating Temperature:-45℃～125℃; 6.Shrinkable Temperature:125℃; 7.RoHS compliant.
	Standard color:	Black(Other color available upon request.)

Technical Data: Property Test Method Stantard Tensile Strength ASTMD 2671 ≥14MPa Elongation ASTMD 2671 ≥400% Density ASTMD 792 1.20g/cm2 Longitudinal shrinlage UL 224 ≤±10% Elongation at Brealk after sging UL 224 158℃×168hrs ≥300% Heat resistance UL 224 225℃×4hrs No viscidity Dielectric strength(kv/mm) IEC 243 ≥20KV/mm Volume Resistance IEC 93 ≥1014Ω.cm Water Absorption ASTM-D570 <0.15%

Hot Melting Adhesive Property Property Test Method Stantard Water Absorption ASTM-D570 <0.2% Intenerating point ASTM-E8 95℃ Racking Strength(PE) ASTM-D1000 120N/25m Racking Strength(AL) ASTM-D1000 80N/25m

With adhesive Specification  SBRSM  Size (mm) I.D. Expanded (mm) After Recovered Stantard length (m/pc) I.D. (mm) Out layer W.T.(mm) Adhesive Layer W.T. (mm) Total W.T.(mm) SBRSM 10.2/3.0 ≥10.2 ≤3.0 1.4±0.20 0.35±0.1 1.75±0.25 1.22 SBRSM 16/5.0 ≥16 ≤5.0 1.5±0.20 0.40±0.1 1.90±0.25 1.22 SBRSM 19.1/5.6 ≥19.1 ≤5.6 2.0±0.20 0.45±0.1 2.45±0.25 1.22 SBRSM 25/8 ≥25 ≤8 2.0±0.20 0.45±0.1 2.45±0.25 1.22 SBRSM 28/6 ≥28 ≤6 2.5±0.20 0.65±0.1 3.10±0.30 1.22 SBRSM 28/9 ≥28 ≤9 2.0±0.20 0.50±0.1 2.60±0.25 1.22 SBRSM 35/10.2 ≥35 ≤10.2 2.2±0.20 0.50±0.1 2.70±0.25 1.22 SBRSM 38.1/12 ≥38.1 ≤12 2.2±0.20 0.50±0.1 2.70±0.25 1.22 SBRSM 43.2/12.7 ≥43.2 ≤12.7 2.2±0.20 0.50±0.1 2.70±0.25 1.22 SBRSM 52.1/16 ≥52.1 ≤16 2.3±0.25 0.50±0.15 2.80±0.30 1.22 SBRSM 63/19 ≥63 ≤19 2.5±0.25 0.50±0.15 3.00±0.30 1.22 SBRSM 75/22 ≥75 ≤22 2.6±0.25 0.50±0.15 3.00±0.30 1.22 SBRSM 85/25 ≥85 ≤25 2.8±0.30 0.50±0.15 3.30±0.30 1.22 SBRSM 95/29 ≥95 ≤29 3.1±0.30 0.60±0.20 3.70±0.35 1.22 SBRSM 115/34 ≥115 ≤34 3.1±0.30 0.60±0.20 3.70±0.35 1.22 SBRSM 140/42 ≥140 ≤42 3.1±0.30 0.60±0.20 3.70±0.35 1.22

Without adhesive Specification  SBRSM  Size (mm) I.D. Expanded (mm) After Recovered Stantard length (m/pc) I.D. (mm) W.T. (mm) SBRSM 10.2/3.0 ≥10.2 ≤3.0 1.75±0.25 1.22 SBRSM 16/5 ≥16 ≤5.0 1.90±0.25 1.22 SBRSM 19.1/5.6 ≥19.1 ≤5.6 2.45±0.25 1.22 SBRSM 25/8 ≥25 ≤8 2.45±0.25 1.22 SBRSM 28/9 ≥28 ≤9 2.60±0.25 1.22 SBRSM 35/10.2 ≥35 ≤10.2 2.70±0.25 1.22 SBRSM 38.1/12 ≥38.1 ≤12 2.70±0.25 1.22 SBRSM 43.2/12.7 ≥43.2 ≤12.7 2.70±0.25 1.22 SBRSM 52.1/16 ≥52.1 ≤16 2.80±0.30 1.22 SBRSM 63/19 ≥63 ≤19 3.00±0.30 1.22 SBRSM 75/22 ≥75 ≤22 3.00±0.30 1.22 SBRSM 85/25 ≥85 ≤25 3.30±0.30 1.22 SBRSM 95/29 ≥95 ≤29 3.70±0.35 1.22 SBRSM 115/34 ≥115 ≤34 3.70±0.35 1.22 SBRSM 140/42 ≥140 ≤42 3.70±0.35 1.22

Page14　Home  Pre. Next  End  PDFdownload

　　Shenzhen Woer Heat-Shrinkable Material Co., Ltd. is the leading manufacturer of heat shrink material products in China. Products we offer are as below: Heat shrinkable tubing, Teflon, PTFE tubing, high heat and abrasion resistant wire, silicone tubing; power cable accessories (heat shrinkable, cold shrinkable and pre-molded for low, medium and high voltage), termination kits, bus bar, insulation sleeves for telecommunication cables and pipeline; fine chemical.